STEINOTHAN® 120

STEINOTHAN® 120 is an insulation element that is installed on roof rafters. The basis of the element is hard polyurethane foam that provides the highest level of insulation. In classical buildings, insulation elements are installed between rafters, which represent thermal gaps and cause loss of energy. With its unique system of applying insulation on rafters, STEINOTHAN® 120 provides thermal insulation without thermal gaps and enables great energy savings. STEINOTHAN® 120 is composed of:

  • Hard polyurethane foam
  • Attachment system with tongue and groove
  • Aluminium foil on both sides
  • Laminated PE foam foil across the whole upper surface
  • Covering tape made of PE foil with adhesive

Advantages of STEINOTHAN® 120 elements:

  • Highest insulation with hard polyurethane foam
  • Installation system enables perfect insulation without thermal gaps
  • Laminated PE foil provides additional acoustic and thermal insulation
  • Thermic joining of the covering PE foil enables strong and long-lasting connections and resistance against rain
  • Large format elements enable fast and installation with a small number of joints
  • High tensile strength that provides great stability in case of loads
  • Environmentally-friendly polyurethane, 100% without H-FCKW and H-FKW (partly halogenated fluorine-chlorine-hydrocarbon)

STEINOTHAN® 120 SILENT

STEINOTHAN® 120 SILENT has all the characteristics of STEINOTHAN® 120 with an additional 8 mm thick PE foam foil on both sides. With this, STEINOTHAN® 120 SILENT offers unbeatable acoustic insulation, especially in case of impact noise.

STEINOTHAN® 120 BITU

STEINOTHAN® 120 BITU has all the characteristics of STEINOTHAN® 120 with an additional 1,5 mm elastomer layer – bitumen membrane on the upper side that offer high walking safety (prevents slipping).

STEINOTHAN® 125 DO

STEINOTHAN® 125 DO has all the characteristics of STEINOTHAN® 125 with an additional vapour-permeable foil on both sides, which makes the whole element vapour-permeable.

Comparison of insulation in case of heating with oil:

Calculation is based on: 10 x 10 m floor area, 120 mm rafter width, 700 mm distance between rafters, 120 mm thickness of insulation.

U – value (W/m2K)Use of heating oil (litre/m2)CO2 emissions m2/year
No insulation2.5~ 25 l~ 70 kg
Insulation between rafters0.33~ 3.3 l~ 9.3 kg
Steinothan® insulation on rafters0.19~ 1.9 l~ 5.5 kg